Viewing entries tagged
HK Laser

Heavy Steel Part Fabrication

Heavy Steel Part Fabrication

Laser cut, bent, and welded steel parts to be light post adapters for civic utility use.

 

If you look close there is a great edge finish on the 3/4" plate off our HK Laser

If you look close there is a great edge finish on the 3/4" plate off our HK Laser

Nothing much to say about this photo other than it's an arty photo of our Fronius welding equipment and one of our super skilled welders. 

Nothing much to say about this photo other than it's an arty photo of our Fronius welding equipment and one of our super skilled welders. 

Below is a video of the part being welded. In the middle of the weld you'll notice there is almost no noise and no spatter which is a great thing!   This means that the program we have for the welder to weld 10g plate to 3/4" plate is almost perfect. 

Laser Precision Beer

Some trick tap handles one of our engineers designed up for a local brewery.  We don't normally do smaller jobs like this at Lean Machine but sometimes you have to break the rules.  I think the results show that if you have access to the most advanced equipment in the world the possibilities are endless.

Normally cutting 10g thick steel with this much detail would result in a glob of molten metal left on the table but our HK laser and a great programming sequence made it happen.  The rear handle is Stainless Steel and the front handle is Mild steel.

Normally cutting 10g thick steel with this much detail would result in a glob of molten metal left on the table but our HK laser and a great programming sequence made it happen.  The rear handle is Stainless Steel and the front handle is Mild steel.